Brand: HYFILTRATE
Model: FF 30/30
Filtration accuracy: 1-50μm
Country of origin: China
Filter media: glass fibre
Filter element type: Air filter element
Length: 770mm
Replace Ultrafilter FF 30/30 air compressor Filter Element - Product features:
-By using ultra pleat technology, the highest retention rate of oil, water aerosols, and particles can be achieved with the lowest pressure drop.
-Stainless steel sleeve with large opening design ensures low pressure drop and high flow rate.
-Service life: Under normal use, the service life is 3000-4000 hours, which may vary depending on the usage environment and working conditions.
-Application areas: Commonly used in industries such as petrochemicals, textiles, electronics, pharmaceuticals, etc., it can be installed as a pre filter before an air dryer to remove oil, particles, and moisture, and protect the desiccant in the dryer.
-Flow rate: approximately 32NM ³/min, capable of meeting the compressed air processing needs of a certain scale.
-Working pressure: typically -21~210 bar, suitable for various pressure environments in air compressor systems.
-Working temperature: up to 120 ℃, capable of stable operation within a wide temperature range.
-Residual oil content: When the intake concentration is 3ppm, it can be reduced to 0.1ppm, and the output air cleanliness is high.
-Maximum pressure difference: The maximum pressure difference at 20 ℃ is 5 bar.
-Filtration efficiency: 99.999%, excellent filtration effect.