Pfc8314u-100 pall oil filter is a PFC series high efficiency oil filter vehicle with a flow rate of 100L / min. It is used in the lubricating system of feed water pump turbine in power plant. It is suitable for the lubricating oil treatment equipment of main engine of air cooling unit in power plant, lubricating oil treatment equipment of feed water pump turbine, subcritical steam parameters, one reheat, single shaft three cylinder double exhaust, direct air condensing steam turbine unit.

Pall high efficiency oil filter truck adopts a new type of Pall Ultipor III series Filter Elements, which can carry out ultra-fine filtration of solid particles in a variety of liquid media in a variety of occasions. It can be used in hydraulic, lubrication and petrochemical industries.

Characteristics of Pall pfc8314u oil filter

1. Lock the differential pressure alarm to prevent false alarm during cold start

2. Open phase and wrong phase protection can prevent the motor from reverse or open phase operation to protect the oil pump and filter element.

3. The filter is equipped with a bypass valve to avoid system disconnection

4. Motor phase fault protection

5. The sound and light differential pressure alarm indicates that the filter element is blocked and replaced

6. The suction port primary filter protects the oil pump and extends the service life of the filter element.

7. The outlet diffuser controls the liquid return direction and flow rate to prevent the swirling flow from mixing the air into the oil tank

8. The universal wheel makes the movement more flexible and convenient.

9. Add oil collecting pan and oil pipe fixing device to reduce environmental pollution

10. The oil pump is equipped with relief valve.