+0086-18567399886

jack@cnxyfilter.com

EnglishEnglish
English

Replace 3M HF30PP005A01 high flow folding water filter cartridge

Replace 3M HF30PP005A01 high flow folding water filter cartridge It is a high flow security filter cartridge made of polypropylene melt blown material, with a filtration accuracy typically ranging from 1-100 μ m. This filter element is widely used in ultra large flow reverse osmosis pretreatment in industries such as power, electronics, chemical, and metallurgy, or as a security filter and pretreatment protection for ultrafiltration systems.The HF40PP005A01 filter element has the characteristics
 

Basic Barameters

Brand: HYFILTRATE

Model: HF30PP005A01

Filtration accuracy: 1-100μm

Outside diameter: Standard size

Inside diameter: Standard size

Total length: Standard size

Filter media: Polypropylene (PP) melt blown material

Filter element type: Air filter element

Replace 3M HF30PP005A01 high flow folding water filter cartridge It is a high flow security filter cartridge made of polypropylene melt blown material, with a filtration accuracy typically ranging from 1-100 μ m. This Filter Element is widely used in ultra large flow reverse osmosis pretreatment in industries such as power, electronics, chemical, and metallurgy, or as a security filter and pretreatment protection for ultrafiltration systems.

The HF40PP005A01 filter element has the characteristics of high flow rate, high filtration efficiency, and large pollutant holding capacity, as follows:

 

-High flow rate: Adopting an outward flow and inward flow direction, with a 3-inch inner diameter of the filter element, the maximum flow rate of a single filter element can reach 70 tons/hour, far exceeding the flux of conventional filter elements.

 

-High filtration efficiency: The filtration accuracy is usually 5 μ m, with a filtration efficiency of over 99.9% for 5-micron particles and over 99.5% for 3-micron particle impurities.

 

-Large pollutant holding capacity: High quality imported filter materials are selected, with loose fiber structure and high porosity, which increases the capacity for impurities. The unit area of filter material can hold high quality particle pollution, and the single filter element can hold up to 10 kilograms of pollutants.

 

-Excellent structural design: Adopting a handle style humanized design, the bottom is sealed with a single O-ring and the filter element is guided and positioned. When installing, insert the positioning column and rotate it 90 degrees to lock it. When replacing, rotate it 90 degrees in the opposite direction to remove it without the need for special tools.

 

-Long service life: The large aperture part can accommodate large particles with sufficient space, while the small aperture part can block small particles, ensuring filtration accuracy and extending service life.

 

-Material safety: The raw material is polypropylene, which is non-toxic, harmless, and odorless. There are no chemical substances generated during the production process, making it safe and reliable.

 

-Small footprint: The unique folding design increases the filtering area, maximizing the area of the filtering medium within a limited space, reducing the number of filter cartridges and housing size. Compared to similar products, it can save 33% to 50% of space.


Technical Parameter

HF40PP005A01 is a high flow folding filter element commonly used in water treatment related filtration scenarios. The relevant introduction is as follows:

 

-Filtering principle: The filtering medium adopts 3M non-woven fabric technology platform and polypropylene melt blown material, which has a deep three-dimensional filtering effect. Larger particle impurities are trapped on the fiber surface, while fine particles are captured in the deep layers of the filter material.

 

-Specification and size: The length can be selected from 10 ", 20", 30 ", 40", etc. The diameter is usually 60mm outer diameter and 28/30mm inner diameter. The filtration accuracy can be varied from 1 μ m, 5 μ m, 10 μ m, etc. This model is generally 40 inches with a precision of 5 μ m.

 

-Flow parameters: The flow direction is smooth from the outside to the inside, with a 3-inch inner diameter of the filter element, allowing the maximum flow rate of a single filter element to reach 70 tons/hour.

 

-Performance advantages: Using patented horizontal folding technology, the filter media area is maximized in a limited space, resulting in high filtration efficiency. The filtration efficiency is greater than 99.9% at 5 microns, and the filtration efficiency for 3 micron particle impurities is also above 99.5%. At the same time, it has strong pollutant holding capacity, with a single filter element having a pollutant holding capacity of up to 10 kilograms and a long service life.

 

-Installation design: Adopting a handle style humanized design, the bottom adopts a single O-ring seal and filter guiding positioning design. When installing, insert the filter element into the positioning column and rotate it 90 degrees to lock it. When replacing, rotate it 90 degrees in the opposite direction to remove it without the need for special tools.

 

-Application areas: Widely used in the pre-treatment of ultra-high flow reverse osmosis in industries such as power, electronics, chemical, metallurgy, etc., or as a security filter, as well as pre-treatment protection for ultrafiltration systems. ...


Industry Application
  • Application of filter element
    Application of filter element
  • Filter element for chemical in
    Filter element for chemical in
  • Filter element for steel works
    Filter element for steel works
A free consultation

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

  • If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

© Copyright: 2020 Xinxiang Huayuan Environmental Protection Technology Co., Ltd.

Chat now

Live Chat

    Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.