PPC-30 water filter uses polyester synthetic non-woven fabric as the filter material, which has the advantages of high filtration efficiency, large flow rate, strong pollutant absorption, good chemical stability, hygiene and safety, good structural adaptability, and low cost.

PPC-30 water filter is a specification of PP melt blown filter, with the following characteristics:

Efficient and high-precision filtration: The Filter Element has a uniform pore size density, with a filtration efficiency of over 99%. It can effectively intercept large impurities such as suspended solids, particulate matter, rust, and sediment in water, and can also block particles smaller than the pore size through bridging phenomenon.

Excellent performance:

Large flux and pollutant capacity: The fiber diameter and gap can be adjusted during the production process, and the micro pores of the filter element have a structure of small inner layer and large outer layer, which increases the flow rate and pollutant capacity, is not easy to block, and has a long service life.

Small pressure loss: The double-layer fiber structure with fine internal and coarse external structure effectively reduces pressure loss and maintains stable filtration efficiency.

High strength: When the water pressure difference between the inlet and outlet of the filter exceeds 0.4Mpa, the filter element will not deform; When the temperature exceeds 90 ℃, the filtration efficiency will not decrease.

Good chemical stability: high self cleanliness, no pollution to water quality, acid and alkali resistance, able to withstand corrosion from organic or inorganic solvents and oils, except for concentrated nitric acid and strong oxidants. The modified polypropylene material after processing also has outstanding hydrophilicity and can be used for oil-water separation.

Health and safety: Made of non-toxic and odorless polypropylene particles, free of any chemical adhesives, in compliance with food hygiene standards, and will not cause secondary pollution to the filtered liquid.

Reasonable structural design: The joint adopts an internationally recognized form, with end caps available in 226, 222, and flat forms, and ports available in two forms: triangular fins and flat heads; It also has a multi-layer depth structure, integrating surface, deep, coarse and fine filtration, and the pore size is distributed in a gradient along the diameter direction, which can be adjusted according to the filtration needs of different media.

Low cost and wide application: The replacement cost is relatively low, making it a commonly used primary filter element in household water purifiers; It is also applied in various scenarios such as pharmaceutical industry liquid filtration, food industry filtration of drinking water, alcohol, juice, etc., chemical industry organic solvent filtration, electronic industry high-purity water pre filtration, oilfield water injection filtration, etc.